The foiled sliders from LAMINE la collecte deserve special attention

Hi everyone!

Quite recently I received for testing sliders from the LAMINE la collecte brand.
The very first results of testing are described in the previous post:
www.wowcharm.us/post/40882/

And now the turn to tell about the foiled sliders and to show my results came

Very thin film 15 microns thick. Such "jewelry" thickness will allow a slider to adjoin to a nail precisely

without tabs, zalom and the sticking-out edges

· Crystal transparency. Even if the film oversteps the bounds of a pattern, when drawing a slider on a nail

only the drawing is visible

· Gloss and good covering ability. the foiled sliders of LAMINE can be applied on varnish of any color.

the pattern will be equally brightly visible

· Elasticity. At the expense of it, the slider can be "pulled" kind of on a nail, having straightened at the same time any fold.

is not torn and ideally fits any shape of a nail

Blue butterflies were the first:


To me they saw each other on a white background:



The second design:




Then I wanted to add brightness:



It is not difficult to work with these sliders, but there are nuances. Likely I was too self-confident when at once began to do design with them, without having read the instruction on the website of the producer. From here and all "neponyatka". And only it is also necessary former to read attentively:

Here also reached the most interesting – a slider covering by usual transparent varnish. If you got used to carry sliders under gel polish, then the sticker covering usual transparent varnish, requires some additional skill. The danger traps in the unexpected place. The matter is that usual varnishes dissolve a sticker film, and, therefore, and the drawing. Whereas gel polishes are absolutely harmless to a film. As with it to live: in the beginning, walk on a slider very small amount of varnish – almost a dry-brush. Wait when varnish dries up. To wait not for long since a varnish coat you put very thin. Then, cover with one more layer with slightly large amount of varnish, again wait how will dry up. Cover a slider in 2-3 layers as you will consider necessary. As you already guessed, so you gradually create more and more thick layer over the picture and it does not manage to be dissolved while varnish dries.

I want to note that color designs - the most unpretentious in work from all tested by me: even the big drop of a top applied directly on the drawing on ignorance did not do it harm.

It was pleasant to work with sliders to me.

Many thanks to the LAMINE la collecte brand and separately to Natalya Galova for the given opportunity to test these products.