It was not yet! Improbable NOVELTIES from the Lucky Rose brand.
The thinnest graceful lines of geometrical figures, light and weightless lace, saturation and harmony of paints in details complemented with invariable usability - all this a new collection of volume sliders Lucky Rose in 3D! For you, dear masters!
The instruction - 3D sliders help thousands of masters to realize quickly the designs demanding big time expenditure when painting manually.
How to work with them? It is very easy to work with 3D sliders of Lucky Rose!
We do everything, as usual:
We prepare nails for a covering, we cover with base, then color, then a top, we do not remove a sticky layer!
1. We cut out the pleasant slider element, we lower in water the drawing up or we put on a wet wadded disk (use of warm water will favorably affect plasticity of a film).
2. We put, a slider element vyrazanny earlier, method of shift of the image on a sticky layer of a top on a nail.
3. We remove surplus of the image or a film and we cover with two layers of a top, a thin brush removing surplus around convex details of the image (as if removing top bubbles in 3D details) on each of layers. We dry and erase a sticky layer.
Manicure is ready.
The instruction into English language.
3D sliders help thousands of nail artists to quickly implement designs that require a lot of time when painting by hand. How it work?
Work with 3D sliders Lucky Rose is very easily!
Doing all, as usual:
Prepare the nails to cover gel polish, cover the base, then color, then top coat, DO not remove the sticky layer!
1. Cut out any element of the slider and put it on a wet cotton ball (warm water will have a beneficial effect on the plasticity of film).
2. Apply, previously cut slider element, by shifting the image to the sticky layer of the top coat on the nail.
3. Remove the excess image or film and cover with two layers of the top, thin brush removing the excess around the convex parts of the image (as if removing the bubbles inside the top coat around 3D parts). Dry and remove the sticky layer.
Manicure is ready.
The Aero series from Lucky Rose is created to help masters to embody the designs created by air brush without its use, and having just used a slider. We picked up the most relevant designs, translucent, minimalstichny and presented them in white and black color that approached on any background. Now in white it is easy to make a gradient of any color in 1 minute.
Novelties Faded.
F novelties
Novelties 2f
Will get acquainted with the full range it is possible HERE!





The instruction - 3D sliders help thousands of masters to realize quickly the designs demanding big time expenditure when painting manually.



How to work with them? It is very easy to work with 3D sliders of Lucky Rose!
We do everything, as usual:
We prepare nails for a covering, we cover with base, then color, then a top, we do not remove a sticky layer!
1. We cut out the pleasant slider element, we lower in water the drawing up or we put on a wet wadded disk (use of warm water will favorably affect plasticity of a film).
2. We put, a slider element vyrazanny earlier, method of shift of the image on a sticky layer of a top on a nail.
3. We remove surplus of the image or a film and we cover with two layers of a top, a thin brush removing surplus around convex details of the image (as if removing top bubbles in 3D details) on each of layers. We dry and erase a sticky layer.
Manicure is ready.



The instruction into English language.
3D sliders help thousands of nail artists to quickly implement designs that require a lot of time when painting by hand. How it work?
Work with 3D sliders Lucky Rose is very easily!
Doing all, as usual:
Prepare the nails to cover gel polish, cover the base, then color, then top coat, DO not remove the sticky layer!
1. Cut out any element of the slider and put it on a wet cotton ball (warm water will have a beneficial effect on the plasticity of film).
2. Apply, previously cut slider element, by shifting the image to the sticky layer of the top coat on the nail.
3. Remove the excess image or film and cover with two layers of the top, thin brush removing the excess around the convex parts of the image (as if removing the bubbles inside the top coat around 3D parts). Dry and remove the sticky layer.
Manicure is ready.
The Aero series from Lucky Rose is created to help masters to embody the designs created by air brush without its use, and having just used a slider. We picked up the most relevant designs, translucent, minimalstichny and presented them in white and black color that approached on any background. Now in white it is easy to make a gradient of any color in 1 minute.



Novelties Faded.



F novelties



Novelties 2f



Will get acquainted with the full range it is possible HERE!
Copy the code and insert into a window of creation of record on LiveInternet, previously having included the Source mode there.
HTML-code: ![]() |
|
The BB code for forums: |
How will it look?
wowcharm.us → It was not yet! Improbable NOVELTIES from the Lucky Rose brand.
![]() |
The thinnest graceful lines of geometrical figures, light and weightless lace, saturation and harmony of paints in details complemented with invariable usability - all this a new collection of volume sliders Lucky Rose in 3D! For you, dear masters! The instruction - 3D sliders help thousands of masters to realize quickly the designs demanding big time expenditure when painting manually... Read more: |
"Testing of sliders from LAMINE | | | Gentle Zoya Azalea" |
You look also:
Other discussed materials:
Easy and tasty salad from cabbage.
Mina-mnm. My empty jars for January, 2025
Dear Marina of Mari67na, we wish happy birthday!
Results of the 118th stage "Magnets". Winners.
|