Sliders with spangles. A novelty in a neylarta.

I welcome all nails which are carried away by design!
I to you today with a survey and fact-finding post.
Couple of days ago in ours manicure community set of persons interested to test a novelty from the Polisfera brand, namely sliders with spangles was carried out. I had an opportunity to test these sliders of one of the first therefore already I have a certain opinion on this product and is ready to share with you it. And also to give couple of advice on use, can will be useful to those to whom these sliders will go to testing or who perhaps will show willingness to buy and try a novelty.

So, than sliders with spangles differ from usual sliders?
Yes in fact, only also differ in existence of these spangles) And is more concrete, the most usual sliders are covered from above with a top layer with spangles. The principle of effect such, as if you want to cover the ready manicure with a glitterny top. Only in this case for you it was already made by the producer and you will not need to look for independently this top, to paint it, to wait for drying... Pasted a slider, covered with a usual transparent top and everything, the glamourous design is ready.



At once it is worth making a reservation that this novelty will interest those fans of beautiful manicure who are not indifferent to any blestyashka. If you the fan of pure color with small or even imperceptible accent in the form of a slayderdizayn, then such option hardly pleases you.
Here I personally in soul of forty and greedy for any brilliant features therefore tested these sliders with pleasure.

Sliders of this series differ in the most various subject: flowers, animal print, geometry, abstraction...
And also differ in shades of spangles. There are three options: golden spangles, silvery and pink.

Example: GOLD



Example: SILVER



Example: PINK



The principle of use of these sliders differs in nothing by and large from usual. But I nevertheless found out couple of nuances and it significantly facilitated process. I will tell also you about them.
It is impossible to call sliders elastic with spangles. It also is clear since the additional layer of a varnish covering with spangles made a slider plenochka even more densely plus spangles kind of reinforce a covering. And so, usual soaking in cold or even warm water, especially on a wadded disk, will help unless to separate a film with the drawing from a paper basis. If you the owner of flat nails, then it is possible that in this case you will manage to transfer a slider to nails and to fix it there.
I have arch nails and convex and from personal experience will tell that at such way of soaking at me sense nothing turned out. A slider film rough, and on my nails without folds any slider did not lay down therefore I just could not seat and smooth with its sense. He even did not wish to grapple with a varnish surface quite long period. The slider just went on a nail to and fro. I managed to fix it only by the brush moistened in zhdsl.
Having tormented and with the second and with the third set of drawings, I understood that it did not put and it is necessary to find a way out somehow. Also remembered that once I already had to test whimsical sliders, which too in any did not want to be pasted to a nail. Then I was helped by hot water. Here I also decided to try it. Generally, you understood, huh? Sliders, at least these, it is better to soak in hot water, I would even tell in very hot. But here the main thing not to overdo them in it. And then at separation of a film from a basis, it well sits down on a nail and even the small elasticity appears and it is possible to bring up her a little at the edges. BUT! You should not delay here! The slider is pliable while hot, but as soon as it cooled down, it becomes dense and whimsical again. From there is a conclusion: It is necessary to work quickly while heat from water still is kept by a slider film.

The second council. If your nails have though a small bend, that is probability that the slider will lay down with folds. And if the usual slider can just be smoothed down in the place of a fold, then with these blestochny it is already more difficult. Owing to the fact that a film dense, folds will be formed quite volume and notable too. Also there is a suspicion that the top layer will not block all this. And so, my council is that it is better to cut a fold nozhnichka and to lay its edges with an overlap at each other. It will turn out more accurately and is less hilly.

Well and last council. Correction. Besides for that reason that these sliders not the thinnest, and spangles, as we know, are in the habit to stick tightly that then long it is necessary to wipe (to tear off) them, I would recommend to use for their correction not zhdsl, and thinner for varnish. It is much more juicy than acetone and works quicker that reduces your time of correction and protects your nerves during this process. (it too from personal experience)

Well and that I all about bad yes about bad. Something is necessary and good to tell.
And it is! Well except visual beauty of course.
Huge plus of these sliders is that they are not afraid of any tops. The Blestochny layer serves as a peculiar protection of the drawing of a slider against greasing. Even if to use top drying, it will not spoil your manicure. Be sure of it!

There now, it seems, and all.
As I will tell a result that sliders were pleasant to me. Yes, there are nuances in use, but they are quite solvable and feasible and difficult it seems only on the first tests. And then already you do everything on the automatic machine, quickly and accurately.

Well and finally I will show a little more svotchy.
On two photos I put that it was visible as on a miscellaneous sliders depending on intensity and a hade of light look.
On some photos sliders were used solo, on some in the company with a stemping or other types of the neylart.



On it all)
Thanks for attention! And beautiful to you manicures!