Fashion, as well as architecture, question of proportions ©
- quite so the slogan of the St. Petersburg brand of sliders Lucky Rose sounds. And when only on the website there was a fact-finding post about their products, already then all lakirouzny seemed to me very tempting and native))
I think who knows me better, will guess why only in written above already several reasons of mine contain "I want"...
And so! Whether it is necessary to say that I was really glad when I at last "happened" and I had an opportunity to get acquainted with products of Lucky Rose closer?!
Especially, when I chose to myself sliders, I was pleased by the range. One business - usual, foiled, with a substrate / without... But, for example, - it you met a coloring for nails? And still there is in group in VK at them an album for wishes - mozhgo to load there a photo of pictures with which you would like to see new sliders!
Generally, they have several different series. And that not to confuse you, I will tell about that today that White Back Metallic is called:
These are sliders which already go with a white substrate - that is, before their use it is possible not to paint color, they will not appear through. Well and the word Metallic as you understand, says that it is not just pictures, and with the foiled patterns.
Lucky Rose has their two views, gold and silver.
Sliders are printed on dense paper, a quality printing. Each "finger" by the size increases - in packing of only 12 pieces. Though, by the way, depending on a series, this number can change.
I liked even a bag - beautiful, stylish. White part opaque.
On a reverse side of packing there is an instruction, and in two languages - Russian and English. But I will show you them to chunut later.
And so - actually, this and everything what it is possible to tell "generally" about, and therefore we pass to concrete sliders.
Application and impression
Many of us who somehow are fond of "coloring" of nails met sliders. And so - therefore I will begin the story about how Lucky Rose behaves with usual varnishes. Because, believe, to tell is about what!In general, I only when started testing, understood that before I had no communication with color sliders on a white substrate - all were transparent, and therefore I surely painted under them white varnish.
Naturally, I do not speak about completely foiled, white or black now... Though - at them the background was transparent too!
And you understand, I had at first a desire "to be reinsured". Well and that a little to calm itself, I decided not to use after all white varnish, but took not completely transparent base, and got that that has such dairy shade:
And time the spring, decided to take flower design!
It is necessary to tell that nails at me not really narrow. Perhaps visually strongly wide they, of course, do not seem, but because they have an arch bend, too small width of sliders will not approach. Right there the size decent, and therefore for a ring finger I took the second finger largest and... it was ideal!
Now it is a little about work and impressions. It is necessary to tell, here me surprised Lucky Rose - and in good or bad sense of this word... I did not solve yet! But I incline after all to good)
So, after I cut out a slider, I put it on a wadded disk - it is possible to lower in the container with water, but my way is more convenient to me. In 10-15 seconds it is already possible "to slaydit" - that is, to shift our picture. And so, as here option already with a white substrate, the slider is more dense. But I did not think that it will be so more dense! If to compare to the same "A black panther", for example, at me even the association with a thermofilm is more. Naturally, at first it confused me a little. But having already put a slider to a nail I understood that it is more convenient to work with such film - after all transparent options at me were torn from time to time - especially if stuck to a nail, and I should have unstuck them to place more correctly. With the same density as at these sliders, it seems to me, it is necessary to try very much that to tear them!
Though there is also such nuance - if when laying a slider strong waves appear, they are more noticeable. And therefore it is possible to cut accurately them and to lay edges of a plenochka at each other. How the slider at me settled, you can see on a photo above.
And I added this flower design gentle light - mint-green notes. And one finger for some reason wanted to be covered with sand...
This slider after overlapping by a top turned out very beautiful! As I "cut" one fold, it smoothed out, and other small in general disappeared. Separate plus I want to note quality of paint - the drawing "fits" well. Of course, if to try, it can be greased, but in comparison with other sliders of Lucky Rose definitely wins this plan!
And then I looked at the nails and... It seemed to me that after all this sand here not really in a subject and I decided to recolour it:
Chose such varnish under color of a floret in the corner.
Though then understood that a floret after all other color... Colors of the varnish which is absent at me. So I did not decide what option was pleasant to me more. And you as think?
Well and summing up the result of testing of the first a slider design I will tell that I put to it firm 5ku!
The second wave of inspiration fell on contrast and bright design, French rolls... Generally, I took here such slider:
By the way, I noticed that at Lucky Rose generally drawings on each finger do not repeat. Perhaps fans of symmetric design not really will be delighted, but to me such options are quite nice.
As I already found out that width and "rotundity" at these sliders just to me by the size, I decided to go further and to try to cut out at once length necessary to me. And again put on a wet wadded disk:
At first I, being guided by a cuticle bend, just I have it on a nail, pressing on the center, and then I smooth with a finger a slider already closer to edge. The main thing to watch that the film adjoined densely and then under it bubbles were not formed. It is also possible to smooth a slider with a wooden stick or a silicone pusher.
Pink settled well, but after a covering I noticed one thing - the top corrodes this foiled part. Though in Lucky Rose's justification I will tell that it at me not for the first time it in communication with sliders - for some reason all of them so behave. Just where the thin pattern goes a metallic, it it is not visible. But here on a ring finger this trouble was very noticeable.
I decided to make the second finger more contrast. And the slider originally is more, and therefore... I cut out it approximately, frankly speaking, leaving free only length.
It is necessary to tell that this sticking-out edge easily cleans up - or it it is possible just to bend and chunut to pull - about my keen edge of a nail this film well tore. Or you should not risk - after overlapping by a top this bend "podrastvoritsya" and it is easy to remove the remains. In the principle and on perimeter it is accurately possible to correct something an orange stick.
And what the result turned out? From far away, it seems to me, everything looks very nicely!
But! If to get accustomed, after all this skukozhenny metallized part very much is evident. And as for a middle finger - for some reason the black covering somewhere cracked! I do not know what it is connected with. Itself of captivity remained whole, and cracks directly in a paint coat. But I did not order such "craquelure", and therefore specifically this design upset me a little...
And alas, for this slider, at beautiful number 17, I will put 3ku that on Maycharm's scale there corresponds to characteristic "usual".
And finally I left the most "sweet" part of the review - it is not coloring of own handles any more, and a covering gel polish for my mummy!
For this manicure I chose red florets and decided to combine them with a cat's eye, similar on tone.
In general, it is necessary to tell, studying the Lucky Rose group in VK, I noticed that generally works just performed by gel polish are shown there. That is this brand as it seemed to me, is guided by manicurists and professional application. It is even visible when you read the instruction (you remember, I did not want it to show you at once is just therefore.):
Personally I, stacking sliders on usual varnish, did not observe all this scheme with bases and tops "to" and "later". And here with gel polish honestly made them on two layers.
Though for the same reinsurance after all added 1 layer of white color.
Here also the instruction from their page looks. Simply slightly more visually:
Also there is also a step-by-step instructing with a photo in the same place - and so, there just and the example with gel polishes is shown!
Somehow our Natasha Chuchundra told me that my way somewhere can work with use of a wadded disk not so successfully. And it is honest, I decided to check it in business. In the old manner got a pan, poured water there and held sliders about 10-15 sec. After that it is necessary to lay out a plenochka on a lint-free napkin and it is good to dry up it as gel polishes are not on friendly terms with water well in any way!
As I already told, I caused base, then a layer of white gel polish, and then... Began to guess - as to me to arrive. The matter is that with other firms before all my attempts to lay a slider on gel polish came to an end not really successfully... On a sticky layer all plenochka stuck tightly, and therefore designs on all nail, because of impossibility further somehow to shift a film, it was necessary to stack "on dry", but also there were enough problems. Having remembered all this bitter experience, I decided to avoid in all ways overlaying of a slider on a sticky layer, and therefore followed advice from the same VK group. There write that for the best sliding it is possible to stack a slider on not dry-through layer of a top. Iiya... quite so I also decided to arrive! And, probably, the layer at me left after all thicker, than there consulted, or I still made something not so, but the slider not just well slid, and oooochen it is good!) Generally to lay it exactly it appeared difficult, plus folds all were not smoothed in any way as to not dry-through top they did not stick.
I suffered a little bit and decided on the second option - simply to stack on stickiness of a top. And, about a miracle, at the expense of the density they did not seek and well moved on a nail! At the same time, it is much simpler to smooth a plenochka at the edges, and therefore everything settled very well!
Moreover, I do not understand distinctions of composition of varnish and gel polish on their properties, but, probably, in gel polish there are no such solvents, as in usual options. And therefore the drawing is not greased in general! Including the metallized pattern. And after overlapping by a top everything keeps within just ideally!
Though only then to me thoughts came that scale is more autumn... But what to do - what spring, what weather, such and nails!
Well and result completely. Here such "kitty" at us turned out!
Very much I worried as will rush - whether the plenochka - it as I already told above will depart, by gel polishes it is not dissolved... But nearly two weeks my mother goes with this marigold and problems any is not noticed!
To this slider I also put firm 5. And in general, for interaction of these unusual for me, for more dense plenochek, with gel polishes - too 5 moreover and pluses me it is not a pity.
Well and summing up the result on three designs, I want to tell that though it is not the first sliders in my practice, after all Lucky Rose was succeeded to surprise me pleasantly! The special love is a work with gel polishes as it became the whole opening for me. Honestly, before I in every possible way refused as I did not have somehow these relations when I tried other sliders. Now I really with pleasure will apply them to gel polishes!
Especially, I have still their coloring ahead... And still many other interesting series...))
But here about usual varnish I had a dual opinion. Of course, our further communication still will show how also other designs behave, but so far 50/50. And therefore I after all will remove one asterisk. And from this series for usual varnishes I will recommend you then lighter options as only black cracked at me. And here with the others problems did not arise - moreover, such dense option was more convenient for me as I did not worry that the slider can tear somewhere.
And therefore I safely say that Lucky Rose is what to surprise. Therefore I recommend to try this brand as it is not the just next sliders, they special and others!
