We adjust a nose a make-up

Important detail – both the contour, and the second shade have to be opaque (sateen formulas will approach), for the most natural effect. Powder or cream – as it is convenient to you. You can use foundations of different shades, not necessarily special "planimetric" products, it is possible also for a shadow, but besides opaque, sateen, without spangles and nacre.
However we made the experiment on the basis of a special "planimetric" palette from Smashbox. The blog Makeupforlife helped to show result.

As you can see, the palette consists of three shades, the full name - Smashbox Step-by-step Contour Kit. (And persons too) here such brush, round and much mown at an angle best of all will be suitable for nose "molding".

And, above all – there is a crib – the short instruction how to do "konturing", or "molding" of the person. Shades: brown Contour, warm bronze and ivory as a highlighter. As you can see, highlighter not such opaque, as other two shades.

Step 1. We put a planimetric shade. We begin directly under an eyebrow and we conduct vertically down to nose wings. Use an average round brush.

Step 2. Paint over wings of a nose the second in sink shade.

Step 3. Shade a round slanted brush. The brush has to be clean. Shade carefully that there were no accurate contours of products.

Step 4. On all length of a nose, beginning from a nose bridge, put a highlighter. If you have very light skin, then the highlighter from a ready planimetric palette can not approach, be not such light. In this case use a separate product, here - Yves Saint Laurent Touche Eclat Radiant Touch in Luminous Ivory shade No. 2.

Shag5. Well shade.
Compare a photo "Before" and "After". The nose after adjustment became more harmonious, with accurate direct forms, thickenings are removed the middle, between wings of a nose and a nose bridge.

Do not forget to illuminate a highlighter beaks of eyes, it will make a nose even more distinguished.
Copy the code and insert into a window of creation of record on LiveInternet, previously having included the Source mode there.
HTML-code: ![]() |
|
The BB code for forums: |
How will it look?
wowcharm.us → We adjust a nose a make-up
![]() |
"To mold" a face by means of a make-up we will need three tone shades. One – on tone or two are more dark than your tone of skin. At makeup artists it is called "Contour", it will be the most dark shade from three. The second – the average shade, is slightly more dark than your tone of skin. The third – the lightest, or the highlighter (Highlighter), a shade is lighter than your tone of skin... Read more: |
"Make-up: bases of bases | | | Councils from the pro: "We mold" a shape of a face a make-up" |
You look also:
Other discussed materials:
Turn
Not terribly
Fish cutlets with cheese
Mina-mnm. My empty jars for January, 2025
|